Wednesday, December 20

Useful Tips on How to Build Deck Railings

The flooring area that extends from the house and is typically uncovered is referred to as the deck on a house. It is possible to build a deck in the backyard, in the front of the home, or to the side of the house. Deck railings give a deck its style and individuality. They play an extremely important role in ensuring that people using the deck remain secure.

Because of this, deck railings have a dual purpose: they are both practical and ornamental. They are appealing components that add design to a house, and they are functional in that they enhance protection. They are a house’s ornamental components that add design to the house. Decks that are higher than thirty inches above the ground and staircases that have five or more steps are typically needed to have it installed.

Additionally, it may be required for decks that are higher than thirty inches above the ground. Even though certain places have different requirements, the typical height range for a deck railing is somewhere between thirty and forty inches. Certain areas, however, have different restrictions. Standard railings, sometimes known as “builder deck” railings, are the types that are both the easiest to create and the easiest to install.

Deck railings typically have a top rail, a bottom rail, side rails, and handrails. In addition, they may include bulging posts, balusters, and handrails. They are available in a wide variety of designs and can be crafted from a variety of materials, including iron, aluminum, natural woods, wood composite materials, and clear glass, among others. Believe it or not, you are able to build a deck railing all by yourself, despite the fact that these railings are easily accessible. Are you curious? Here below is how exactly it works.

Materials Required

  • Hardwood measuring 2 inches by 2 inches
  • Bolts used for carriages
  • Lumber measuring 2 inches by 4 inches
  • 2 inches by 6 inches of wooden planks
  • To fasten, galvanized screws are used.
  • 1 can of varnish to be used as a stain

Tools Required

  • Wood saw
  • Electric drill
  • Screwdriver
  • Paintbrush
  • Knife


  1. Remove any wood or other material that is attached to the deck. This will allow you to locate the rim joist, which is the part of the flooring that is furthest from the house.
  2. Construct the upper railing out of wood measuring 2 by 6 inches by using a screwdriver and galvanized screws to fasten it to the deck.
  3. With the help of your wood saw, cut the pieces of wood measuring 2 by 2 inches to the appropriate height for the spindles.
  4. With the help of the electric drill, drill two holes into each spindle. It is necessary to drill a hole that is approximately 1 1/2 inches in distance from the bottom of the deck. The other hole ought to be drilled at a distance of one and a half inches. Beginning from the top of the deck and proceeding outward. These holes need to be smaller than the carriage bolts in order to function properly.
  5. Use the carriage bolts to securely fasten the spindles into position. Which will add both strength and steadfastness to the assembly.
  6. Using the saw, cut the pieces of wood that are 2 inches by 4 inches to the appropriate lengths so that they can be used as spindles. Make sure that they are the same length because it will be easy to spot any mistakes if they are not.
  7. Using the galvanized screws and your screwdriver, attach the parts that you cut to each of the spindles.
  8. At this point, you should permanently attach the railings to the deck by screwing them in. Raise the height of the railing by screwing through the bottom.
  9. Using the knife, pry open the lid of the can of varnish stain.
  10. Using a paintbrush, soak up a small amount of the varnish stain by dipping it only slightly into the can.
  11. Using the paintbrush, paint the railings with even strokes. And continue doing so until you have completed painting the entire railing.

Important information to keep in mind:

  • Always make sure that the railings of your deck are built in accordance with the rules that are in place in your area regulating them.
  • In order to ensure safety, there should be no more than nine inches of distance between spindles.
  • Take your time and measure everything carefully at each stage so that the finished product looks as professional as possible.
  • Painting or staining the wood helps to protect it from the elements and makes it more long lasting.
  • The height of the railing should be around 4 inches, but some additional length should be allowed for it. It can be flush with the bottom of the outside area of the deck.
  • It is imperative that the steps that go up to the deck be placed in the appropriate location in order to facilitate simple access to the deck.
  • Choose a style of railing that fits your needs, is within your price range. It complements the architecture of the house you live in.

Leave a Reply

Your email address will not be published. Required fields are marked *